DATASAT RS20i


Specifications

    Digital Audio Decoders
  • Dolby® Atmos
  • Dolby® Surround upmixer
  • Dolby® Digital
  • Dolby® TrueHD Decoder
  • Dolby® Digital Plus Decoder

  • DTS
  • DTS:X™
  • DTS Neural:X upmixer
  • DTS-HD Master Audio™
  • DTS-HD High ResolutionX

  • Auro-3D (optional)
  • Auro-3D Decoding (up to 13.1)
  • AuroMatic upmixer

  • Signal Inputs HDMI Audio & Video Inputs
  • Audio Channels: Up to 8 (LPCM, DTS-HD Master Audio & Dolby AC3)
  • Connectors: 5 HDMI connectors (4 switched as inputs and 1 as output)
  • HDMI V2.0b compliant digital audio with video pass-thru
  • HDCP 2.2 on all inputs and output

  • Digital Audio Inputs
  • Channels: 16, fully routable as to output
  • Additional 8 channels with optional H617 upgrade, for Bi-Amping and Tri-Amping. Connector one DB25 Male (Ch 17-24).
  • Connectors: Two DB25 Female (Ch1-8 and Ch9-16)
  • Digital Format: AES/EBU
  • Sample Rates: 44.1kHz, 48kHz, 96kHz and 192kHz

  • Other Digital Audio Inputs
  • Connectors: Two TOSLINK (optical S/PDIF) and 1 coaxial (S/PDIF)

  • Analog Audio Inputs
  • Channels: 8 balanced, can be connected unbalanced
  • Connector: DB25 (Female)
  • Impedance: 10k ohms
  • Reference level: 300mV RMS

  • Other Analog Audio Inputs
  • Channels: 2 stereo single ended input pairs
  • Connectors: 4 RCA jacks
  • Impedance: 10k ohms
  • Sensitivity Adjustable: -16dBv to -4dBv

  • Microphone Input
  • Single channel -68dBv to -8dBv input with switchable +48V phantom power
  • Connector: XLR female

  • Digital Audio Outputs
  • Channels: 16, fully routable as to input
  • Connectors: Two DB25 Male (Ch1-8 and Ch9-16)
  • Digital Format: AES/EBU
  • Sample Rates: 48kHz, 96kHz and 192kHz

  • Analog Audio Outputs
  • Channels: 16 (fully routable as to input), common mapping with Digital Outputs
  • Connectors: Two DB25 Male (Ch1-8 and Ch9-16)
  • Additional 8 channels with optional H617 upgrade, for Bi-Amping and Tri-Amping. Connector one DB25 Male (Ch 17-24).
  • Balanced (can be connected unbalanced or single ended) Ships with two DB25 Female to XLR 8-channel analog breakout cables (three with optional H617 upgrade)
  • Level: 300mV with volume at -15.0, +26dBu max (balanced)
  • Connector: 1 single ended RCA output, channel-selectable to drive an external monitor. Adjustable Levels, to 300mV RMS
  • Connector: 1 single ended RCA output, summed output for the hearing impaired. Fixed Level Out, 300mV RMS

  • Audio EQ
    Dirac Live® Room Optimization
  • 16-Channel Dirac Live® room optimization
  • Dirac Live® Installer kit sold separately

  • 3rd Octave EQ
  • 16 channels – 31 user-adjustable bandpass filters
  • Gain +/-6dB adjustable in 0.5dB steps
  • Frequencies range from 20Hz to 20kHz

  • Parametric
  • 16 channels with 3 user-adjustable parametric filters for shaping Subwoofer response
  • Adjustable from 20 to 200Hz, gain +/-6dB in 0.1dB steps
  • Q range from 0.7 to 5

  • Hi/Low/Bandpass Active Crossovers
  • Adjustable from 20Hz to 20kHz. Adjustable slope and filter types: 6, 12, 18, 24, and 48 dB/octave Butterworth; 12, 24, and 48 dB/octave Linkwitz-Riley; and 6, 12, 18, 24, and 48 dB/octave Bessel

  • Bass/Treble tone control
  • Adjustable +/-6dB per channel •Corner frequency for bass adjustable from 50Hz to 300Hz
  • Corner frequency for treble adjustable from 1.5kHz to 12.0kHz

  • Bass Management
  • Full or adjustable high pass settings for screen and surround speakers
  • Adjustable low pass filter for sub woofers
  • Support for 0 to 4 sub woofers
  • Optional phantom center or phantom surround speakers

  • Audio Delays
  • Individual Channel Delays
  • 0 – 999ms Global Delay
  • 0 –1000ms Note: Total delay per channel not to exceed 1000ms

  • Automation Inputs/Outputs
  • 16 bi-directional GPIO’s, optically isolateds
  • Connector one DB25 female
  • 4 programmable 12V output triggers, 3.5mm mono jack
  • External +5v@140mA

  • Management
  • Remote Control
  • RS232, Connector one DB9 female
  • 10/100Mbps Ethernet
  • Can be controlled by smart phone, iPad, Android based devices via iRule or VNC
  • Crestron Integrated Device Setup/Operation Profiles
  • Configurable for up to 20 user defined named input selections. Input selections include processing options along with a selected named set for EQ and output channel profile
  • Configurable for up 20 user defined named EQ sets which include definitions for Dirac optimization, third octave EQ, parametric EQ, bass and treble controls
  • Configurable for up to 20 user defined output channel profiles which include output channel names, output routing, crossover high/low pass filters
  • User defined input selections controllable by Touchscreen, GPIO, or ethernet
  • Export/Load of user configurations via USB

  • Power Requirements
  • 105-130 VAC or 215-260 VAC, 50-60Hz. Input voltage range manually switched at the rear panel by changing fuses and rotating fuse holder.
  • 94w power consumption.

  • Hardware Dimensions
  • Imperial – 5.6”(H) x 17.4”(W) x 17.63”(D). Height with feet removed 5.25″. Shipping Weight: 36lbs (with packaging and accessories)
  • Metric – 14.22 cm(H) x 44.2 cm(W) x 44.78 cm(D). Height with feet removed 13.34cm. Shipping Weight: 16.33kg (with packaging and accessories)
  • RS20i unit weight 26.5lbs (12.02kg)
  • 3U 19” rackmount when rack ears are installed (supplied in RS20i packing kit).

  • Regulatory Compliance
  • UL CB Scheme
  • FCC Part 15, subpart B Class B
  • CE •RoHS compliant

  • E&OE All product specifications subject to change without notice. All trademarks are properties of their respective owners.



CONTACT US
If you have any queries...